Home > News > Content
Stainless Steel Door Materials Used
Jul 11, 2017

Stainless Steel Door materials used

First: materials used

Doors and windows of the main materials generally include three aspects: aluminum, glass, hardware, the owners in the purchase of products, often pay more attention to the thickness of aluminum and glass, but the requirements of the hardware is not very high, it is not comprehensive The In fact, the state of the requirements of color aluminum windows are a certain standard. High-quality aluminum windows used in the aluminum, its thickness, strength and oxide film generally meet the national standards, such as the relevant provisions of the state requirements: color aluminum window wall thickness should be not less than 1.2mm above the oxide film The thickness should be 10 microns. And the tempered glass is better than ordinary glass, if the safety of doors and windows and durability considerations, stainless steel hardware accessories (such as screws, hinges, **, etc.) than aluminum accessories, and the best choice for the use of POM POM material Products, because such products have a higher strength and wear resistance, the use of smooth process, not easy to bad. You know, windows and doors damage is usually from the doors and windows accessories start yo!

Second: processing

With good materials, the next step is the processing of doors and windows. As the technical content of doors and windows is not high, the degree of mechanization is not high, most also rely on the manual installation of workers, which requires operators to have a good sense of product quality. It is important to strengthen the proficiency and product awareness of the operator in the production process. High-quality color aluminum windows, processing fine, tangent smooth, consistent angle (the main frame material is usually 45 degrees or 90 degrees), in the splicing process should not be more obvious gaps, sealing performance, smooth switch. If the processing failed, there will be sealing the nature of the problem, not only leaks, but also in the strong wind and large external force, the glass will burst, shedding phenomenon, so that the owners caused the loss of property and even hurt the phenomenon.

Third: appearance

Owners to buy doors and windows products, usually very focused on the appearance of the product and glass decorative patterns, and often despise the composite film on the surface of the doors and windows, this composite film is formed by artificial oxide film coloring, with corrosion resistance, wear resistance, high gloss Degree, but also has a certain fire function, so in the purchase of aluminum doors and windows products to compare more similar products. In the glass process on the people vary, different owners choose according to their own preferences.

Fourth: price

As the price of windows and doors and the price of aluminum prices have a direct correlation, but generally in a period of time the performance of doors and windows is relatively stable, in general, the quality of high quality doors and windows than the quality of doors and windows products to 30% Poor doors and windows are usually used with a large number of impurities in the recovery of aluminum extrusion aluminum, aluminum used in some wall thickness of only 0.6-0.8 mm, both from the tensile strength or yield are much lower than the relevant provisions of the country, such doors and windows Very insecure, so the owners in the purchase of products do not map a moment of cheap and despise their own and others personal safety.

Fifth: performance

The performance of doors and windows due to the use of different areas and focus on different, but usually have to consider the following aspects: strength, which is mainly reflected in the doors and windows of the choice of materials, whether he can withstand high pressure; air tightness, In the doors and windows structure, doors and windows of the inner fan and frame structure is tight, doors and windows are close.

Sixth: credibility

In the choice of time should also pay attention to the credibility of the business and service quality, this is also very important! Here we can test through three aspects:

First, try to choose a good brand reputation manufacturers, China Wood Circulation Association Wooden Professional Committee held in Beijing, the doors of the industry conference, the General Assembly through rigorous research and evaluation of China's top 30 members of the system. These manufacturers in the scale of product quality and service system are more standardized.

Second, by examining the relevant qualification of manufacturers to compare the relevant industry standards are complete real.

Third, before the installation of attention to check the door by checking the door of the internal timber, the final check. We can not see how to do to the manufacturers, only to consider the well-known high-profile good brand can be guaranteed. We believe that a price of a cargo is justified.